Four Flute Carbide Roughing Tiain Coat End Mill CE TUV Approved 6mm 7mm 8mm Diameter

Four Flute Carbide Roughing Tiain Coat End Mill CE,TUV Approved 6mm 7mm 8mm Diameter

Description

Roughing end mills are designed to quickly remove large amounts of material. These kind of end mills utilize a wavy tooth form cut on the periphery. This shape forms many successive cutting edges producing many small chips. During cutting, multiple teeth are in contact with the workpiece reducing chatter and vibration. Generally roughing end mills are followed by a finishing end mill due to the fact that they leave a rough surface finish. Roughing end mills are sometimes called hoggers or hogging.

 
We use 100%  original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills with very strong abrasive resistance and impact strength.
 
Original raw micro grain material, high hardness and T.R.S. 
 
   1, Co: 10-12%, WC: 88-90%,
        Grain size: 0.4μm,
        Hardness: 92.5-94.0 HRA,
        T.R.S.: 4200-4800 N/mm2,
        Density: 14.3-14.8 G/cm3
 
   2, We got 250T Extruder, 10MPa Overpressure Sintering Furnace-Vacuum
      Dewaxing, these two equipments are very very important for manufacture and high quality carbide rods.
 
   3, We use our own carbide rod for 90% of cutting tools. 
 
   4, We have introduced advanced CNC grinding machines in operating,Rollomatic,Schneeberger from Switzerland, ANCA from Australia, Zoller from German,KEYENCE from Japan,set  up(Japan FANUC, brother processing center) tool laboratory   test cut.Our technology from Taiwan. Guarantee high precision and good performance.
 
   5, Helix Angle: 38-42 °(we could do 4 of them are 37°)
         Diameter of cutting edge: 6-20mm
         Diameter of rods: 6-20mm
         Length: 50-100mm
         Cutting Form: Ball nose, Corner Radius, Taper Flute, etc.
         Flutes No.: 3​-4
  

 
 Super coating

     TiAN,TiCN TiN  and  ARCO ,
     improve tool life, reduce the coefficient of friction.
 

 Applications

    For Stainless steel Only
 

 Price Performance Ratio

   From tungsten powder to end mills, that's the reason of our competitiveness!
   Make sure about each piece end mill has a good quality,high precision and good performance.
   More discount will be offered according to exact quantity.
   Welcome to be our agents, OEM is also available.

 Products display